Quote:
66. Route a 3/8�x 6� vacuum hose from the fitting closest to the supercharger on the bottom of the Throttle Body Inlet Casting to the lower fitting in the IAC adapter bracket.
67. Route another 3/8�x 4� hose from the remaining fitting on the bottom of the Throttle Body Inlet Casting to a 3/8� “T�. Route another 3/8�x 4� hose from the “T� to the upper fitting
on the IAC adapter bracket.
68. Route a final 3/8�x 16� vacuum hose from the PCV valve on the drivers’ side of the valve cover, between the IAC adapter bracket and the supercharger, and connect it to the vacant fitting on the 3/8� “T�.
|
Lower IAC fitting goes directly to the fitting on the TB Inlet Casting closest to the blower.
Fitting on the Inlet Casting closest to the TB runs to a "T". This "T" then has a hose running to the upper IAC fitting, and one running to the PCV valve.