|
That's an interesting way to do the install...I bought MonStar's and did it a little differently. If you don't want to mess with adapters and have access to a welder or someone that can weld it for you the feet can be swapped for a drop-in install. If you compare the seats side-by-side you'll notice that 3 out of 4 "feet" are different. Remove the ones that are different from both the prelude and s2k seats by drilling the rivets then weld the prelude feet on the s2k rails. Bolt the seats in the car and call it a day...took me 2hrs total.
--Ian
EDIT: BTW, by not using adapters the seat sits as low as possible (the pan on the driver's seat is against the carpet when all the way back) and by a purely un-scientific guesstimate I'd say they're approx 1" lower than stock.
__________________
'01 Prelude SH w/ stuff
12.3@118
Last edited by clendaniel; 01-05-2004 at 07:59 PM.
|
