Door panel removal is fairly straight forward. You'll need a phillips and flatbladed screwdriver.
- Remove the triangle sail pillar (by mirror) but pulling it off.
- remove screws located around perimeter off door ( I think there is about 3)
- Remove one screw from little change holder pocket, and pocket itself
- remove screws from door handle trim
- pry out mirror switch (92-93, driver's side only)
- take off handle trim ( pull handle to clear trim). Disconnect wiring plugs
- start at bottom of door. Pull outward HARD to remove pop-clips
- work your way around door undoing pop-clips as you go (about 10 or so)
- Pull door panel up to unhook from window frame
EDIT: well damn, I guess a picture is worth a thousand words. . .